RESUMO
(1) Background: The failure of nickel-titanium (NiTi) rotary files is a complication related to endodontic instruments. The aim of this study was to compare the resistance to cyclic fatigue between rotary and reciprocating file systems. (2) Methods: Specific PICO: Population (P): artificial root canals; Interventions (I): instrumentation with NiTi rotary and reciprocating files; Comparison (C): rotary versus reciprocating files; Outcome (O): cyclic fatigue resistance. Studies were identified through bibliographic research using electronic databases (Medline, Embase, Scopus, SciELO, and WOS). The studies were combined using a random effects model by the inverse variance method. The effect size was the mean of the time to fracture (TTF) and number of cycles to fracture (NCF). Heterogeneity was assessed using the p value of the Q test for heterogeneity and the I2. (3) Results: TTF for rotary files was determined in 474.5 s and 839.1 for reciprocating without statistically significant differences. NCF for rotary systems was determined in 1444.2 and for reciprocating file systems in 4155.9 with statistically significant differences (p = 0.035), making reciprocating files more resistant. (4) Conclusions: Reciprocating files have better resistance to cyclic fatigue than rotary files. When tested in double curvature canals, reciprocating files also showed higher resistance.
RESUMO
Introducción: Los dientes primarios juegan un importante papel en el crecimiento y desarrollo general de los niños, por lo que es necesario conservarlos hasta el momento de su recambio fisiológico. Cuando existe una afectación pulpar que compromete la vitalidad del diente, la pulpectomía se convierte en un reto para el odontopediatra debido a la compleja anatomía radicular de los dientes primarios. En esta revisión bibliográfica se darán a conocer diferentes sistemas de limas usados en odontopediatría, y así brindar una mirada actualizada de la instrumentación rotatoria al realizar pulpectomías en los molares primarios. Material y Método: se realizó una búsqueda bibliográfica en Pubmed y Web of Science de acuerdo con criterios de inclusión y exclusión previamente establecidos. Resultados: tras aplicar los criterios de inclusión y exclusión fueron seleccionados un total de 30 referencias bibliográficas de los últimos 15 años. Conclusión: las limas rotatorias pediátricas pueden considerarse alternativas seguras y más eficientes en la realización de pulpectomías en molares primarios, ya que se reduce el tiempo de tratamiento, se produce desbridamiento completo de los conductos y se mantiene la función del diente hasta su exfoliación. (AU)
Introduction: Primary teeth play an important role in the growth and development of children, so it is necessary to keep them until the moment of their physiological replacement. When there is a pulp involvement that compromises the vitality of the tooth, pulpectomy treatment becomes a challenge for the pediatric dentist due to the complex root anatomy of primary teeth. This review of the literature will present different file systems used in primary teeth and provide an updated look at rotary instrumentation when performing pulpectomies on primary molars. Material and Method: a bibliographic search was carried out in Pubmed and Web of Science according to previously established inclusion and exclusion criteria. Results: after applying the inclusion and exclusion criteria, a total of 30 bibliographic references from the last 15 years were selected. Conclusion: pediatric rotary files can be considered safe and more efficient alternatives in performing pulpectomies on primary molars, due to treatment time is reduced, complete debridement of the root canals is produced, and tooth function is maintained until exfoliation. (AU)
Assuntos
Dente Decíduo , Pulpectomia/instrumentação , Pulpectomia/métodos , Dente Molar , Odontopediatria/métodosRESUMO
Introducción: Los dientes primarios juegan un importante papel en el crecimiento y desarrollo general de los niños, por lo que es necesario conservarlos hasta el momento de su recambio fisiológico. Cuando existe una afectación pulpar que compromete la vitalidad del diente, la pulpectomía se convierte en un reto para el odontopediatra debido a la compleja anatomía radicular de los dientes primarios. En esta revisión bibliográfica se darán a conocer diferentes sistemas de limas usados en odontopediatría, y así brindar una mirada actualizada de la instrumentación rotatoria al realizar pulpectomías en los molares primarios. Material y Método: se realizó una búsqueda bibliográfica en Pubmed y Web of Science de acuerdo con criterios de inclusión y exclusión previamente establecidos. Resultados: tras aplicar los criterios de inclusión y exclusión fueron seleccionados un total de 30 referencias bibliográficas de los últimos 15 años. Conclusión: las limas rotatorias pediátricas pueden considerarse alternativas seguras y más eficientes en la realización de pulpectomías en molares primarios, ya que se reduce el tiempo de tratamiento, se produce desbridamiento completo de los conductos y se mantiene la función del diente hasta su exfoliación. (AU)
Introduction: Primary teeth play an important role in the growth and development of children, so it is necessary to keep them until the moment of their physiological replacement. When there is a pulp involvement that compromises the vitality of the tooth, pulpectomy treatment becomes a challenge for the pediatric dentist due to the complex root anatomy of primary teeth. This review of the literature will present different file systems used in primary teeth and provide an updated look at rotary instrumentation when performing pulpectomies on primary molars. Material and Method: a bibliographic search was carried out in Pubmed and Web of Science according to previously established inclusion and exclusion criteria. Results: after applying the inclusion and exclusion criteria, a total of 30 bibliographic references from the last 15 years were selected. Conclusion: pediatric rotary files can be considered safe and more efficient alternatives in performing pulpectomies on primary molars, due to treatment time is reduced, complete debridement of the root canals is produced, and tooth function is maintained until exfoliation. (AU)
Assuntos
Dente Decíduo , Pulpectomia/instrumentação , Pulpectomia/métodos , Dente Molar , Odontopediatria/métodosRESUMO
Peri-implant soft tissue deformities are an increasingly common phenomenon in the esthetic zone. While the most widely studied esthetic complications are peri-implant soft tissue dehiscences, there are other esthetic concerns in routine clinical practice that require investigation and treatment. Thus, this report on two clinical cases describes a surgical approach using the apical access technique to treat peri-implant soft tissue discoloration and fenestration. In both clinical scenarios, the defect was accessed via a single horizontal apical incision without removing the cement-retained crowns. A bilaminar technique using apical access with a simultaneous connective tissue graft seems to offer promising results for the treatment of peri-implant soft tissue deformities. At the 12-month reevaluation, an increase in peri-implant soft tissue thickness was observed, resolving the pathologies presented.
Assuntos
Implantes Dentários para Um Único Dente , Implantes Dentários , Humanos , Implantação Dentária Endóssea/efeitos adversos , Implantação Dentária Endóssea/métodos , Estética Dentária , CoroasRESUMO
One of the most used rotary files in endodontics is NiTi files due to their superelastic properties. This property means that this instrument has extraordinary flexion that can adapt to large angles inside the tooth canals. However, these files lose their superelasticity and fracture during use. The aim of this work is to determine the cause of fracture of the endodontic rotary files. For this purpose, 30 NiTi F6 SkyTaper® files (Komet, Germany) were used. Their chemical composition was determined by X-ray microanalysis, and their microstructure was determined by optical microscopy. Successive drillings were carried out with artificial tooth molds at 30, 45, and 70°. These tests were carried out at a temperature of 37 °C with a constant load controlled by a high sensitivity dynamometer of 5.5 N, and every five cycles were lubricated with an aqueous solution of sodium hypochlorite. The cycles to fracture were determined, and the surfaces were observed by scanning electron microscopy. Transformation (austenite to martensite) and retransformation (martensite to austenite) temperatures and enthalpies were determined by Differential Scanning Calorimeter at different endodontic cycles. The results showed an original austenitic phase with a Ms temperature of 15 °C and Af of 7 °C. Both temperatures increase with endodontic cycling, indicating that martensite forms at higher temperatures, and the temperature must be increased with cycling to retransform it to austenite. This fact indicates the stabilization of martensite with cycling, which is confirmed by the decrease in both transformation and retransformation enthalpies. The martensite is stabilized in the structure due to defects and does not retransform. This stabilized martensite has no superelasticity and, therefore, fractures prematurely. It has been possible to observe the stabilized martensite by studying the fractography, observing that the mechanism is by fatigue. The results showed that the files fracture earlier the greater the angle applied (for the tests at 70° at 280 s, at 45° at 385 s, and at 30° at 1200 s). As the angle increases, there is an increase in mechanical stress, and, therefore, the martensite stabilizes at lower cycles. To destabilize the martensite, a heat treatment can be carried out at 500 °C for 20 min, and the files recovers all its superelasticity.
RESUMO
The aim of this study was to determine the possibility of identifying a dental implant through the measurement of the apical width and the interspiral distance in a periapical radiograph after being subjected to high temperatures for certain lengths of time. In total, 11 fresh human anatomical models were selected, in which 137 implants were placed. Previous periapical radiographs were performed using parallelizers in each implant. Subsequently, the anatomical models were introduced into a crematory oven at different temperatures and for various durations: 500 °C/15 min, 500 °C/30 min, 700 °C/15 min, 800 °C/15 min, 800 °C/45 min, 500 °C/15 min, 700 °C/15 min, and finally, 1000 °C/120 min. After this, X-rays were taken via a parallel technique, and the apical width and interspiral distance were measured. The implants were disinserted, and the coronal width was used to calculate magnification or possible distortion. All data were analyzed by the Mann-Whitney U test. There were no statistically significant differences for the apical width parameter, except when the temperature was raised to 700 °C/15 min and to 800 °C/45 min. For the interspiral distance parameter, there were no statistically significant differences, except when the implants were subjected to 800 °C/15 min and 1000 °C/120 min. It was determined that there were changes in some groups based on the increase in temperature and exposure time. Neither of the two parameters were completely useful for the identification because some of the groups studied in both variables presented differences, which makes them difficult to identify correctly.
RESUMO
Aim: The aim of this study was to compare the cyclic fatigue strength of different reciprocating rotary systems depending on the movement used. Methods: Four study groups were analyzed (n = 30): (1) Reciproc®, (2) Reciproc Blue®, (3) Wave One Gold® and (4) Procodile®. Each group was divided into three subgroups according to the motion used: (A) Reflex Dynamic® (n = 10), (B) ReFlex Smart® (n = 10) and (C) conventional reciprocating motion (n = 10). They were used in a dynamic cyclic fatigue prototype until their fracture, and the time was measured in seconds. The results obtained were analyzed with the ANOVA method, and for two-to-two comparisons, the Tukey method and Weibull statistics were used. Results: Procodile ReFlex Smart had the longest time to failure, and statistically significant differences were found between Procodile ReFlex Smart and the other files and motions (p < 0.05). Conclusion: Smart motions increase cyclic fatigue strength. ReFlex Smart® motion increases the cyclic fatigue strength of reciprocating rotary systems, and Procodile® ReFlex Smart was the most resistant system file.
RESUMO
Osseointegration capacity and good mechanical behavior are key to the success of the dental implant. In many investigations, comparisons of properties are made using different dental implant designs and therefore the results can be influenced by the macrodesign of the dental implant. In this work, studies were carried out with the same dental implant model using different roughness and different materials-commercially pure titanium (grade 4) and zirconia. For this purpose, 80 smooth passivated titanium (Ti), 80 smooth zirconia (ZrO2), and 80 rough passivated titanium (Ti-R) dental implants were used. The samples were characterized by their roughness, wettability, surface energy, residual stresses, and fatigue behavior. The implants were implanted in minipigs for 4 and 12 weeks. The animals were sacrificed, and histological studies were carried out to determine the osseointegration parameters for each of the implantation times. Ti and ZrO2 dental implants have very similar wettability and surface energy properties. However, the roughness causes a decrease in the hydrophilic character and a decrease of the total surface energy and especially the dispersive component, while the polar component is higher. Due to the compressive residual stresses of alumina sandblasting, the rough dental implant has the best fatigue behavior, followed by Ti and due to the lack of toughness and rapid crack propagation the ZrO2 implants have the worst fatigue behavior. The bone index contact (BIC) values for 4 weeks were around 25% for Ti, 32% for ZrO2, and 45% for Ti-R. After 12 weeks the Ti dental implants increased to 42%, for Ti, 43% for ZrO2, and an important increase to 76% was observed for Ti-R implants. In vivo results showed that the key factor that improves osseointegration is roughness. There was no significant difference between ZrO2 and Ti implants without sandblasting.
RESUMO
Several regeneration techniques and materials have been proposed for the healing of bone defects after surgical endodontic treatment; however, the existing literature does not provide evidence on the most recommended techniques or materials. The aim of the present systematic review and network meta-analysis (NMA) is to summarize the clinical evidence on the efficacy of guided tissue regeneration techniques (GRTs). The PRISMA recommendations were followed. Four databases were searched up to December 2021. Randomized clinical trials (RCTs) with a minimum follow-up of 6 months were included. The risk of bias was assessed using the Cochrane Collaboration tool. A fixed effects model and frequentist approach were used in the NMA. Direct GRT technique comparisons were combined to estimate indirect comparisons, and the estimated effect size of the comparisons was analyzed using the odds ratio (OR). Inconsistency was assessed with the Q test, with a significance level of p < 0.01, and a net heat plot. A total of 274 articles was identified, and 11 RCTs (6 direct comparisons of 15 techniques) were included in the NMA, which examined 6 GRT techniques: control, Os, PL, MB, MB + Os, and MB + PL. The MB + Os group compared to the control (OR = 3.67, 95% CI: 1.36-9.90) and to the MB group (OR = 3.47, 95% CI: 1.07-11.3) showed statistically significant ORs (p Ë 0.05). The MB + Os group presented the highest degree of certainly (P-score = 0.93).
RESUMO
Current endodontic procedures continue to be unsuccessful for completely removing pathogens present inside the root canal system, which can lead to recurrent infections. In this study, we aimed to assess the antimicrobial capacity and tissue response of two inorganic bactericidal additives incorporated into a paste root canal sealer on contaminated root dentin in vivo. An experimental study was performed in 30 teeth of five Beagle dogs. After inducing microbiological contamination, root canal systems were treated by randomly incorporating one of two antimicrobial additives into a commercial epoxy-amine resin sealer (AH Plus), i.e., G3T glass-ceramic (n = 10) and ZnO-enriched glass (n = 10); 10 samples were randomized as a control group. After having sacrificed the animals, microbiological, radiological, and histological analyses were performed, which were complemented with an in vitro bactericidal test and characterization by field emission scanning electron microscopy. The tested groups demonstrated a non-significant microbiological reduction in the postmortem periapical index values between the control group and the bactericidal glass-ceramic group (p = 0.885), and between the control group and the ZnO-enriched glass group (p = 0.169). The histological results showed low values of inflammatory infiltrate, and a healing pattern characterized by fibrosis in 44.4% of the G3T glass-ceramic and 60.0% of ZnO-enriched glass. Bactericidal glassy additives incorporated in this root canal sealer are safe and effective in bacterial reduction.
RESUMO
To compare and contrast the accuracy of piezoelectric ultrasonic insert (PUI) and trephine bur (TB) osteotomy site preparation techniques for apical location. (1) Material and methods: A total of 138 osteotomy site preparations were randomly distributed into one of two study groups. Group A: TB technique (n = 69) and B: PUI technique (n = 69). A preoperative cone-beam computed tomography scan and an intraoral scan were performed and uploaded to implant-planning software to plan the virtual osteotomy site preparations for apical location. Subsequently, the osteotomy site preparations were performed in the experimental models with both osteotomy site preparation techniques and a postoperative CBCT scan was performed and uploaded into the implant-planning software and matched with the virtually planned osteotomy site preparations to measure the deviation angle and horizontal deviation as captured at the coronal entry point and apical end-point between osteotomy site preparations using Student's t-test statistical analysis. (2) Results: The paired t-test found statistically significant differences at the coronal entry-point deviations (p = 0.0104) and apical end-point deviations (p = 0.0104) between the TB and PUI study groups; however, no statistically significant differences were found in the angular deviations (p = 0.309) between the trephine bur and piezoelectric ultrasonic insert study groups. (3) Conclusions: The results showed that the TB is more accurate than the PUI for apical location.
RESUMO
The aim of this paper was to assess the differences in tissue response to implantation during 15, 30 and 45 days in the subcutaneous connective tissue of Wistar rats from three biomaterials: Angelus MTA®, Theracal LC®, and Angelus MTA® to which 25% bioglass G3 was added. Twenty-four Wistar rats were used, the materials were inserted into the rat's dorsal area in silicone tubes 5 mm long by 1.5 mm diameter. Histological reaction was assessed at 15, 30, and 45 days after implantation. They were then stained with hematoxylin eosin and evaluated by two observers. Data were analyzed using Fisher's exact test and Mann-Whitney's U test was used to determine the association between variables. Angelus MTA induced the formation of dystrophic calcifications twice as much as Theracal LC (p < 0.05). The addition of G3 did not affect the greater or lesser occurrence of calcifications (p > 0.05). Theracal LC and MTA plus G3 caused an inflammatory reaction, which was chronic at 15 days and decreased in intensity, almost disappearing after 45 days. Theracal LC, as well as Angelus MTA plus G3, were well tolerated when implanted in the subcutaneous connective tissue of rat. Histologically, no inconvenience was found for the use by direct contact of Theracal LC, and the mixture of MTA with 25% bioactive glass G3, in the tissue of Wistar rats.
RESUMO
The present systematic review and meta-analysis aims to determine the effect of computer-aided navigation techniques on the accuracy of endodontic access cavities. MATERIALS AND METHODS: A systematic literature review and meta-analysis of clinical studies, based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) recommendations, was performed that evaluated the root canal location rate of computer-aided navigation techniques applied to endodontic access cavities. Four different databases were used to consult the literature: PubMed-Medline, Scopus, Cochrane, and Web of Science. After discarding duplicate articles and applying inclusion criteria, 14 articles were selected for qualitative analysis and 13 for quantitative analysis. RESULTS: the root canal location success rate started at 98.1% (CI: 95.7-100%) of the cases performed through a computer-aided navigation technique. The prediction interval ranged from 93.3% to 100%. The meta-analysis did not detect heterogeneity between the combined studies (Q-test = 17.3; p = 0.185; I2 = 25%). No statistically significant differences were found between computer-aided static navigation techniques (success rate: 98.5%) and computer-aided dynamic navigation techniques (success rate: 94.5%) (Q test = 0.57; p = 0.451), nor between in vitro studies (success rate: 96.2%) and in vivo studies (success rate: 100%) (Q test = 2.53; p-value = 0.112). An odds success ratio of 13.1 (CI: 95%; 3.48, 49.1) encourages the use of computer-aided navigation techniques over conventional endodontic access cavity procedures. CONCLUSIONS: the endodontic access cavities created using static and dynamic computer-aided navigation techniques are highly accurate in locating the root canal system.
RESUMO
BACKGROUND: The aim of this study was to compare the influence of two novel reciprocating movements on the cyclic fatigue resistance of endodontic reciprocating files. METHODS: 30 Procodile® (Komet Medical, Lemgo, Germany) files were selected in this study and distributed according to the following study groups depending on the movements to be performed: ReFlex Dynamic (n = 10), ReFlex Smart (n = 10) and Reciproc (n = 10) reciprocating movement. These files were fixed to a specific dynamic cyclic fatigue device designed and manufactured by 3D impression to simulate the pecking motion performed by the operator. The time to failure and the number of cycles of in-and-out of the endodontic files was registered. The results were analyzed by ANOVA and Weibull statistics. RESULTS: Statistically significant differences were found when the number of cycles of in-and-out movement and the time to failure of ReFlex Dynamic and Reciproc reciprocating movement (p < 0.001) and between ReFlex Smart and Reciproc reciprocating movement (p < 0.001) were compared in pairs. However, no statistically significant differences were observed between time to failure and number of cycles of in-and-out movement of ReFlex Dynamic and ReFlex Smart reciprocating movement (p = 0.253). CONCLUSIONS: The ReFlex Smart reciprocating movement increased the cyclic fatigue resistance of endodontic reciprocating files compared with traditional reciprocating movement.
Assuntos
Preparo de Canal Radicular , Titânio , Desenho de Equipamento , Falha de Equipamento , Alemanha , Humanos , Teste de MateriaisRESUMO
El tratamiento de recesiones gingivales utilizando procedimientos de cirugía plástica periodontal es habitualmente requerido en la odontología moderna. El objetivo final de estos procedimientos es la cobertura completa de la raíz y los resultados estéticos agradables. La literatura muestra que el colgajo de avance coronal + injerto de tejido conectivo podría ser considerado como el "gold standard" para el tratamiento de recesiones gingivales unitarias. Sin embargo, en la arcada inferior podemos encontrarnos con limitaciones anatómicas que nos impidan realizar las técnicas convencionales de cirugía mucogingival. En este trabajo se presenta y describe el tratamiento de recesiones gingivales unitarias y múltiples que afectan a la zona anteroinferior, las cuales se trataron mediante la técnica de Edlan-Mejchar modificada. La utilización de la técnica de Edlan-Mejchar modificada muestra resultados positivos para tratar recesiones gingivales en el sector anteroinferior
Treatment of gingival recessions using periodontal plastic surgery procedures is routinely required in modern dentistry. The ultimate goal of these procedures is complete root coverage and pleasing aesthetic results. The literature shows that the coronal advancement flap + connective tissue graft could be considered as the "gold standard" for the treatment of single gingival recessions. However, in the lower arch we can find anatomical limitations that prevent us from performing conventional mucogingival surgery techniques. In this work we present and describe the treatment of single and multiple gingival recessions that affect the lower anterior zone, which were treated using the modified Edlan-Mejchar technique. The use of the modified Edlan-Mejchar technique shows positive results to treat gingival recessions in the mandibular anterior area
Assuntos
Humanos , Feminino , Adulto Jovem , Adulto , Retração Gengival/cirurgia , Gengivoplastia/métodos , Tecido Conjuntivo/transplante , Retalhos Cirúrgicos/cirurgia , Resultado do Tratamento , Estética DentáriaRESUMO
The aim of this systematic review and meta-analysis was to analyze the efficacy of the computer-aided static navigation technique on the accuracy of root apex location in endodontic microsurgery. MATERIAL AND METHODS: A systematic literature review and meta-analysis, based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) recommendations, of clinical studies that evaluated the apex location rate of the computer-aided static navigation techniques applied to endodontic microsurgery. A total of four databases were consulted in the literature search: Pubmed-Medline, Scopus, Cochrane, and Web of Science. After eliminating duplicated articles and applying the inclusion criteria, seven articles were selected for the qualitative and the quantitative analysis. RESULTS: The root apex location success rate stated at 96.8% (confidence interval (CI): 93.0-100%) of the cases performed through a computer-aided static navigation technique. The prediction interval ranges from 91.4% to 100%. The meta-analysis did not detect heterogeneity between the combined studies (Q-test = 6.15; p-value = 0.407; I2 = 2.4%). The computer-aided static navigation techniques showed a root apex location success rate 27 times higher than conventional endodontic microsurgery procedures (Q test = 0.80; p = 0.671; I2 = 0%). Three studies of computer-aided static navigation techniques and control group were compared using a random effects model with the Mantel-Haenszel method with a statistically significant odds success ratio of 27.7, with a 95% confidence interval between 11.3 and 68.1 (z test = 7.23; p < 0.0001). CONCLUSIONS: According to in vitro studies analyzed, endodontic microsurgeries performed through computer-aided static navigation techniques show a high precision.
RESUMO
PURPOSE: To analyze the influence of the pecking motion frequency on the cyclic fatigue resistance of endodontic rotary files. MATERIAL AND METHODS: Sixty PlexV 25.06 endodontic rotary files were selected and distributed into three groups: 30 movements/min (n = 20), 60 movements/min (n = 20), and 120 movements/min (n = 20). A dynamic cyclic fatigue device was designed using Computer Aided Design/ Computer Aided Engineering (CAD/CAE) technology and manufactured by 3D impressions to simulate the pecking motion performed by an operator. Failures of the endodontic rotary files were detected by a Light-Emitting Diode (LED)/Light-Dependent Resistor (LDR) system controlled by an Arduino-Driver complex and management software. Endodontic rotary files were tested on an artificial root canal manufactured by wire electrical discharge machining (EDM), with similar dimensions to those of the instrument under examination. Endodontic rotary files were used following the manufacturer's recommendations. The results were analyzed by ANOVA and Weibull statistics. RESULTS: All pairwise comparisons revealed statistically significant differences in all three variables, except for the difference in the number of cycles between the groups with 60 and 120 movements/min (p = 0.298). The scale distribution parameter of Weibull statistics showed statistically significant differences in all three variables, except for the differences in the number of cycles between groups with 30 and 60 movements/min (p = 0.0722). No statistically significant differences in the three variables were observed for the shape distribution parameter. CONCLUSION: A low frequency of pecking motion is recommended to reduce the risk of failure of endodontic rotary files associated with cyclic fatigue.
RESUMO
OBJECTIVE: To analyze the antimicrobial activity of photodynamic therapy as an adjunct to conventional endodontic treatment, particularly against Enterococcus faecalis. METHOD AND MATERIALS: A total of 42 single-rooted teeth obtained from 33 patients with apical periodontitis were included. Sampling was developed in three stages: (1) immediately after accessing the root canal, (2) after chemical and mechanical instrumentation, and finally, (3) after photodynamic therapy application. The bacterial load of each sample was quantified by seeding on blood agar plates and selective M-Enterococcus agar. All growing colonies were identified using MALDI-TOF (Bruker; matrix-assisted laser desorption/ionization time-of-flight), and the entire bacterial microbiota composition was determined in the first sample by PCR-DGGE (polymerase chain reaction denaturing gradient gel electrophoresis), using 16 rDNA primers and selective nucleotide sequencing. RESULTS: The endodontic therapy obtained a mean reduction in the cultivable bacterial load of 1.12 log, whereas the photodynamic therapy combination significantly increased the bacterial clearance (P < .0001). Viable cells of E faecalis were detected in 16.6% of root canals, with a mean value of 93 CFU per tooth, which was reduced to 67 and 9 CFU/tooth after conventional endodontic and photodynamic therapy treatments, respectively. Molecular E faecalis detection demonstrated that this species was present in 23.2% of baseline samples. DGGE analysis demonstrated the existence of a more complex microbiota than those observed using classical cultures. CONCLUSION: Photodynamic therapy as an adjunct to root canal treatment produces a significant reduction in E faecalis bacterial load, and it should be considered in the prevention of apical periodontitis.
Assuntos
Periodontite Periapical , Fotoquimioterapia , Cavidade Pulpar , Enterococcus faecalis , Humanos , Tratamento do Canal RadicularRESUMO
BACKGROUND: The complex anatomy of dens invaginatus makes access cavity to root canal system difficult, which has an impact on the prognosis of these teeth. A novel technique, based on new technologies, is proposed to make access cavity conservative and guided with minimal dental structure lost. MATERIAL AND METHODS: This case report shows the root canal retreatment and the endodontic surgery of a dens invaginatus type II in a left lateral upper incisor previously treated which was affected by a chronic apical abscess and an apical fracture. A Cone Beam Computed Tomography was performed to better diagnosis the dental anatomy. An intraoral scan was performed to get a digital 3D model. A computer-guided implant planning software was used to plan the access cavity and design the splint guided. Finally, the clinical crown was restored by a resin nanoceramic veneer made by a chairside system made up of an intraoral scanning unit and a grinding unit. Last, the authors carried through the endodontic surgery to extract the apical fractured fragment. RESULTS: Follow-up appointments at 6, 12 and 18 months showed a radiographic reduction of the periapical lesion and absence of clinical signs. CONCLUSIONS: The splint guide allowed a guided and conservative access cavity to root canal system. It facilitates the root canal retreatment and improves the prognosis of the teeth with dental malformations. Key words:CAD-CAM, Cone-Beam Computed Tomography, dens in dente, dens invaginatus, dental pulp cavity, endodontics.
RESUMO
The aim of the present study was to analyse differences in the tissue response to the different haemostatic agents used for periapical surgery (BloodSTOP iX® (oxicellulose), Expazen® (aluminum chloride), calcium sulphate (CS), Gelatamp® (gelatin sponge) and Hemocor® (ferric sulphate). Seventy-two bone defects were made on the calvarium of 36 Sprague-Dawley rats. The specimens were euthanised at 3, 6 and 12 weeks. Histological analysis revealed a giant cell foreign body reaction against BloodStop iX® , Gelatamp® and Hemocor® . Leukocytes persisted at the surgical bed during the healing process longer as expected with Gelatamp® (6 weeks) and Hemocor® (12 weeks). We confirmed a generalised delay in bone formation. Calcium sulphate did not cause any foreign body reaction. CS showed excellent results with a high degree of compatibility, there was no inflammatory reaction with this agent after 12 weeks and was not associated with a significant foreign body reaction at any time during the study.
